Click image to view full size image
Dual Band Monopole And Dipole Antenna Wifi Receiver With Rf 1.37 Cable
Detail Product Description
Frequency: 2400 ~ 2500 MHz
S.W.R: 2.0 MAX
Impedance:50 ohm
Peak Gain: 5 dB
Connector: RP-SMA Male; SMA Male.
Application:
1.Wi-Fi /WLAN /MEMO /Bluetooth System
2. Router
3. IEEE802.11 WLAN System
4. Wireless Communication System
Specification
| A. Electrical Characteristics | ||
| Frequency | 2400 ~ 2500 MHz | |
| Impedance | 50 ohm | |
| S.W.R | 2.0 Max. | |
| Peak Gain | 5 dB | |
| Return Loss | >= 10 dB | |
| B. Material & Mechanical Characteristics | ||
| Cable Type | RF 1.37 | |
| Connector Type | RP-SMA Male; SMA Male | |
| Body | ABS, Gray | |
| C. Environmental | ||
| Operation Temperature | - 40 C ~ + 65 C | |
| Storage Temperature | - 40 C ~ +80C | |
Characteristics and Reliability Test
| Test Items | Test Condition and Procedure | Requirements | ||
| C1 | S.W.R. | Set DUT on Network Analyzer; make individual calibration to test | Directive DUT specification | |
| M1 | Vibration | MIL-STD-202G, 201A Amplitude: 0.03 inch (0.76mm); Freq: 10 to 55 Hz 3 directions; 2 hours for each direction | 1. No Visual Damage 2. Frequency Tol.<= 5% | |
| M2 | Random Drop | Height: 1.5 Meter; 3 directions; 1 time for each direction | 1. No parts separated 2. Frequency Tol.<= 5% | |
| M3 | Solderability | MIL-STD-202G, 210F, cond. A Solder iron: 350±10°C; Duration: 5 seconds | 1. Mounted on PCB 2. No Visual Damage | |
| M4 | Terminal- Pull Test |  Sell
New Login
Company QR code Anytime Anywhere Mobile |
||